Kenwood TS-450S Instruction Manual page 73

Hf transceiver, all mode multi bander

Hide thumbs Also See for TS-450S:

Table of Contents

(3) Operation

1. Set the desired transmit frequency.

2. Press the AT TUNE key. CW mode is entered, the AT

TUNE indicator lights, and tuning starts.

Note

The tuner will not function when the CAR control is turned

fully counterclockwise.

3. When tuning is complete, the AT TUNE indicator goes off,

and the mode returns to the original mode automatically.

beep sounds.

Note

If an alarm sounds, the antenna system may be defective,

so check it.

5. Make sure the antenna system is not defective, and press

the AT TUNE key again.

Table of Contents

Ts-6905