North Star M110800J.1 Owner's Manual page 58

Table of Contents

Advertisement

Step 14 – Throttle Cable Setup Cont.
• Lower beam to horizontal position and lock the horizontal latch as
shown
Attach free end of throttle cable to bracket as shown below. Tighten
nuts on cable to secure throttle cable to bracket.
• Attach throttle bracket assembly to beam using (2) Throttle Cable to
Beam Flange Bolts and (2) Throttle Cable to Beam Flange Nut.
• Align bolts in center of slots on throttle bracket. Torque to 21 ft.-lb.
NOTE: Adjust throttle bracket forward or backward for optimal engine
performance.
Fasteners Needed from Parts Bag:
Throttle Cable to Beam
Flange Bolt
Qty 2
Assembly Instructions
Throttle Cable to Beam
Flange Nut
Qty 2
Nut
Throttle Cable
Nuts
58
Tools Needed
• 13mm Wrench
2 Needed
• Torque Wrench
Throttle
Cable
Throttle
Bolt
Cable Assembly

Advertisement

Table of Contents
loading

This manual is also suitable for:

1108001109001131

Table of Contents