North Star M110800J.1 Owner's Manual page 49

Note: Throttle cable is assembled to the engine. Cable routing will be
shown in a future step.
• Mount fully assembled engine and pump to engine mount bracket on
the hydraulic tank assembly using (4) engine bolts and (4) nuts.
• Torque to 21 ft.-lb.
Fasteners Needed from Parts Bag:
Engine to Tank
Flange Bolt
Qty 4
Assembly Instructions
Step 7 – Engine to Tank
Engine to Tank
Flange Nut
Qty 4
Bolt
49
Tools Needed
• 13mm Wrench
• Torque Wrench
Engine
Engine Mount
Bracket
Nut