North Star M110800J.1 Owner's Manual page 57

Step 14 only applies to Models 110900 and 1131
• One end of the throttle cable is connected to the engine. Route
unattached end of cable from engine downward towards engine mount
bracket. Ensure cable routes thru the hose guide.
• There is (1) crimped clamp secured on the cable and (1) vinyl coated
clamp that is free moving on the cable.
• Insert bolt thru the crimped clamp that attaches the cable to the engine
mount bracket. Secure with nut. Torque to 21 ft.-lb.
• Vinyl coated loop clamp will be connected to engine guard bolt in a
future step.
Fasteners Needed from Parts Bag:
Engine Throttle Clamp
to Engine Mount
Flange Bolt
Qty 1
Hose Guide
Engine/Pump
Engine Mount Bracket
Assembly Instructions
Step 14 – Throttle Cable Setup
Engine Throttle Clamp to
Engine Mount
Flange Nut
Qty 1
Crimped Clamp
Bolt and Nut
Throttle Cable
57
Tools Needed
• 13mm Wrench
(2 Needed)
• Torque Wrench
Tow Bar