North Star M110800J.1 Owner's Manual page 43

Step 1 – Fender to Tank Assembly
• Set hydraulic tank assembly on level surface.
• Detach left and right fenders from hydraulic tank assembly after
unpacking. Discard bolts, washers, and nuts.
• Left and right fenders will be installed on the opposite side as
delivered in the packaging.
• Align left and right fenders to hydraulic tank assembly as shown
below.
• Insert bolts and secure with nuts.
• Torque to 21ft.-lb.
Fasteners Needed (Located in Owner's Manual Bag):
Fender to Tank
Button Head Cap Screw
Qty 4
Bolt
Right
Fender
Assembly Instructions
Fender to Tank
Nyloc Nut
Qty 4
Left
Fender
Nut
Nut
Bolt
Left
Fender
43
Tools Needed
• 5mm Allen Wrench
• Torque Wrench
Pictured below is the hydraulic tank
assembly after unpacking from crate.
Remove bolts as shown.
Right
Fender