Intel Mobileye Shield+ v2.0 Technical Installation Manual page 37

See below each dip switch combination and the relevant functionality:
Switches Alert
combination
1&2 DZ
3&4 DZ & PCW
5&6 DZ & PCW
Mobileye Shield+ V2.0| January 2022
Installation Manual v1.1
Dip Switches status:
Up position = ON
Down position = OFF
Switches status
1 = OFF & 2= ON
All other scenarios
3 = OFF & 4= OFF
3 = ON & 4= OFF
3 = OFF & 4= ON
5 = OFF
5 = ON
6 = ON
6 = OFF
Mobileye Proprietary and Confidential
support@mobileye.com
Functionality
DZ visual icon + audio
Only visual
Audio & visual icon are disabled
DZ icon will blink at a 1HZ frequency
PED icon will blink at a 3HZ frequency
Visual icon (DZ or PCW) will blink continuously
Volume in low mode and according to the
potentiometer resistor
Volume in high mode and according to the
potentiometer resistor
Enable manually adjustment of the volume level
using the potentiometer resistor
Disable manual volume adjustment
DZ = Danger zone alert – Yellow pedestrian icon
PCW = Pedestrian collision warning – Red pedestrian icon
MOBILEYE, AN INTEL COMPANY
WWW.MOBILEYE.COM