Table of Contents
Advertisement
✓ You should see the
❖ Once the angle has been verified and fixed, drill & screw (or use rivets) the entire holes on
the metal bracket.
❖ Push 1-1/8" grommet into center hole.
❖ Feed the Mobileye Coax cable trough grommet into interior of the bus.
❖ Align camera housing mount with (4) mounting holes and screw the camera to the metal
mounting bracket.
7.3.2 Rear camera`s tilt adjustment (X axis):
Tilt adjustment is done by software (ME Toolkit).
It is not allowed to open the rear camera housing to adjust manually the lens as it will lose the
sealing and will void warranty.
Please carefully follow the steps below:
Mobileye Shield+ V2.0| January 2022
Installation Manual v1.1
bottom
of the TAC at the bottom of the image
Mobileye Proprietary and Confidential
support@mobileye.com
MOBILEYE, AN INTEL COMPANY
WWW.MOBILEYE.COM
Advertisement
Table of Contents
