Table of Contents
Advertisement
❖ burn the relevant "Shield rear side" profile using clone tool application
❖ Reset power to the Junction Box for changes to take effect.
7.3.1 Rear camera`s angle adjustment (Y axis):
For ideal calibration of the rear camera, each rear camera should be calibrated and adjusted
according to the installation height based on the table below.
According to the installed camera height, place the TAC at the correct distance and make sure the
TAC board stands at 90cm from the ground.
Distance of rear camera to the
front of the bus
7-20 meters
Mobileye Shield+ V2.0| January 2022
Installation Manual v1.1
Installed Camera height
2.3
2.2
2.1
2
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
Mobileye Proprietary and Confidential
support@mobileye.com
MOBILEYE, AN INTEL COMPANY
WWW.MOBILEYE.COM
Distance of TAC from the camera
2.39
2.25
2.1
2.01
1.87
1.78
1.67
1.55
1.42
1.26
1.1
0.85
0.67
0.29
Advertisement
Table of Contents
