BenQ Gaming X300G User Manual page 72

Item
Security
Settings
Firmware
Upgrade
Factory Default
• Panel Key Lock
With the control keys on the projector locked, you
can prevent your projector settings from being
changed accidentally (by children, for example).
When the Panel Key Lock
the projector will operate except the power key (
To release panel key lock, press and hold
right key) on the projector or remote control for 3
seconds.
Note
If you turn off the projector without disabling panel key lock, the
projector will still be in locked status next time it is turned on.
• Change Password
Sets a password or changes the current password.
See "Utilizing the password function" on page 91.
• Power On Lock
Activates Power On Lock for the projector. Before
activating the function, you need to set a password
for the projector. See
function" on page 91.
Allows you to upgrade the firmware on the projector via
SettingXchange. Visit
the SettingXchange software and its user guide.
The power LED indicator flashes red when firmware
upgrade is in progress. See
on page 36 for more information.
Returns most of the settings to the factory preset
values.
Note
• This function resets your projector only. If you wish to reset your Android
TV dongle (QS02), perform factory reset from the Android settings menu.
• The following settings will still remain: Projector Position,
3D Keystone, High Altitude Mode, Light Source Information,
BenQ HDMI Media Streaming (QS02), Security Settings.
Options and descriptions
is on, no control keys on
"Utilizing the password
Support.BenQ.com
"Upgrading your projector"
72
).
(the
to download