Power Led Indicator - BenQ Gaming X300G User Manual

Note
• When supplying power directly to the projector via the supplied power adapter, please use the
supplied power cable to avoid possible dangers such as electric shock and fire.
• Prior to pairing the remote control to your projector you must ensure that your remote control is
in range of the projector's IR sensor. See
details.
4. Power on the projector and follow the on-screen instructions to
complete the initial setup. When you're promted to set up your remote,
select "Not now" to proceed. You can refer to QS02 user manual from
Support.BenQ.com
5. Check if an updated firmware is available to your product. Refer to
"Upgrading your projector" on page
6. To access more functions or make further adjustments to the projector
after finishing the initial setup, press the
menu will be displayed. For how to switch to the Advanced OSD menu,
refer to "Menu navigation" on page
7. Go for a preferred scenario.
• "Enhancing gaming experience" on page 44
• "Watching streaming videos" on page 46
• "Projection" on page 50
• "Playing music by your projector" on page 52

Power LED indicator

LED indicator
Solid orange
Flashing green
4
1
for more information.
2
"Remote control effective range" on page 23
36.
57.
Status & Description
Stand-by mode
Powering on
32
3
or
button, and the Basic OSD
for more