Fine-Tuning The Image Clarity - BenQ Gaming X300G User Manual

Note
• The maximum angle of adjustment is
• If the screen and the projector are not perpendicular to each other, the projected image becomes
trapezoidal. To correct this, see
• When the projector is on, DO NOT place the projector with its vents facing down as this will block
the vents.

Fine-tuning the image clarity

To sharpen the picture, adjust the focus by using one of the following
methods.
• Realtime Auto Focus: When the projector is moved or the projection
distance is changed, the function takes effect automatically. Be sure
the distance from the projection lens to the screen is within 1.8 meters .
Enable this funciton from one of the following menus:
• the Basic menu - Smart Auto Settings > Realtime Auto Focus
• the Advanced menu - Installation > Smart Auto Settings >
Realtime Auto Focus
• the Advanced menu - Installation > Focus > Realtime Auto Focus
• Auto focus: Press the focus button
projector will automatically focus the image and then display the focus
pattern and adjustment bar. If you are satisfied with the auto focus
result, press
• Manual focus: Press the focus button
the projector will automatically focus the image and then display the
focus pattern and adjustment bar. If you are not satisfied with the
auto focus result, press the left
control to manally adjust the image focus. When you are done making
the adjustments, press
is also accessible from
Manual Focus.
20 degrees.
"Keystone" on page 39
to leave.
to return to the previous menu.
the Advanced menu -
for details.
on the remote control and the
on the remote control and
or right buttons on the remote
Installation > Focus >
38
The menu