Projection; Wireless Projection; Wired Projection - BenQ Gaming X300G User Manual

Projection

Wireless projection

Wireless projection is available only after the supplied Android TV dongle
(QS02) is installed, and the projector and your device are connected to
the same wireless network. Refer to the QS02 user manual from
BenQ.com or scan the following QR code for instructions on how to
perform wireless projection.

Wired projection

You can connect a device equipped with HDMI or DP Alt Mode capabilities
to the projector to broadcast videos and images using either an HDMI
cable or certified USB-C 3.0 cable.
Warning
Use only certified HDMI or USB-C cables to make connections with other devices.
Note
Not all devices with a USB-C port have DisplayPort functionality. Check your device's documentation
for clarification. The USB-C port on this projector cannot support media reader (i.e., it cannot access
files stored on a flash storage drive).
To connect a device with HDMI or USB-C with DP Alt Mode capability:
1. Connect the device to the HDMI or USB-C port on the projector with
a certified cable. A pop-up notification will appear indicating that a
device is connected.
2. Confirm whether you want to project video from the device. The video
from the device will be displayed once the signal from the device is
detected.
Note
How-to video
Wireless Projection
50
Support.