110 to 230 volts, but could fail if power cuts or surges of more than10 volts occur. In these high-risk areas, it is recommended that a power stabilizer unit be used in conjuction with this projector. BenQ PB8220 User’s Guide Introduction...
BenQ PB8220 User’s Guide Save this user’s guide: The information contained in this manual will assist you in operating and maintaining your personal projector. Warranty Limited Warranty BENQ warrants this product against any defects in material and workmanship, under normal usage and storage.
— Consult the dealer or an experienced radio/TV technician for help. EEC Statement This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. BenQ PB8220 User’s Guide Introduction...
BenQ PB8220 User’s Guide Shipping Contents The Projector is shipped with the cables required for connection to standard PC or laptop computers. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact personnel at the place of purchase.
IR remote sensor Ventilation grill Speaker Projection lens adjuster RGB signal input RGB signal output connector BenQ PB8220 User’s Guide 10 11 14 15 Audio/ Video connector Audio jack USB mouse connector S-Video jack RS 232 control port Rear adjuster feet...
BenQ PB8220 User’s Guide External Control Panel Power Presses and holds the Power key to turn the projector on or off. Auto Automatically determines the best picture settings for current received signals. Left/ Keystone - Right/ Keystone + Menu will display the menu system on screen.
Switchable Normal/ Video mode for data/ video display • Powerful AV function to provide high quality AV picture • HDTV compatibility (YP Note: The brightness of the projected image will vary depending on the ambient lighting conditions and contrast/brightness settings. BenQ PB8220 User’s Guide Introduction...
BenQ PB8220 User’s Guide Remote Control Description Power Menu 3 Left/ Keystone - 4 Right/ Keystone + Auto L-Click/ R-click Zoom in/ out By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size.
Avoid excessive heat and humidity. There may be danger of an explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries accord- ing to the manufacturer’s instructions. BenQ PB8220 User’s Guide Install batteries as indicated by the diagram inside the compartment.
BenQ PB8220 User’s Guide INSTALLATION Screen Size Place the projector at the required distance from the screen according to the desired picture size (see the table below). Screen Size (Max.) Diagonal A. Width (in) (cm) 30.4 61.8 60.8 123.65 91.2 185.3...
Page 15
PC/Notebook DVD Player AUDIO S-VIDEO VIDEO • 480p • 1080i To RGB Input RGB IN Y Pb Pr VIDEO Video / Audio S-VIDEO S-Video BenQ PB8220 User’s Guide To RGB output RGB OUT PC Audio AUDIO IN CONTROL Control Installation...
BenQ PB8220 User’s Guide OPERATION Start Up Plug the power cord into a wall socket. Turn on the main power switch. Press and hold POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on.
Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality. Projector Auto Source BenQ PB8220 User’s Guide Projector Remote control Remote control Operation...
BenQ PB8220 User’s Guide Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Auto Menu System Press Menu for the main menu, and then press Menu again to select items in the sub-menu.
BenQ PB8220 User’s Guide 1. Display Menu FUNCTION DESCRIPTION Corrects any keystoning of the image. Keystone Adjusts the brightness of the image. Brightness Adjusts the degree of difference between dark and light in the image. Contrast Adjusts to avoid the occurrence of flicker.
BenQ PB8220 User’s Guide 2. Image Menu FUNCTION Ratio H-position V-position Color Temp. Information System Sharpness Color Tint Operation DESCRIPTION Users have 2 options for the image ratio. 1. 4:3 2. 16:9 Adjusts the horizontal position of the projected image.
Selects the input source from among PC, Video, S-Video, and YP Source when several sources are available. Adjusts the volume level. Volume Adjusts the treble level. Treble Adjusts the bass level. Bass Mute BenQ PB8220 User’s Guide DESCRIPTION Ceiling mounted projection Ceiling mounted and rear- screen projection Operation...
BenQ PB8220 User’s Guide 4. Control Menu FUNCTION DESCRIPTION Language sets the language for the OSD control menus. Use the 3 / 4 key to select the desired language from Language among English, French, German, Italian, Spanish, Korean, Simplified Chinese and Traditional Chinese.
Increases or decreases the color range (R, G, B) of the image. Adjusts the image to make it appear more red or blue. Adjusts the image to make it appear sharper or softer Selects PIP image systems: Auto, NTSC, PAL, SECAM BenQ PB8220 User’s Guide Operation...
BenQ PB8220 User’s Guide Shutdown Press and hold POWER and a warning message will appear. To turn off the projector, press POWER again. The fan will continue to run for approximately two minutes. Turn off the main power switch. Disconnect the power cord from the wall socket.
LED blinks orange and the lamp turns off automatically. The LED keeps blinking while the unit is off. If the LED light is off, the operation and temperature of the projector’s lamp are normal. BenQ PB8220 User’s Guide Maintenance...
BenQ PB8220 User’s Guide Lamp Replacement Caution To reduce the risk of electrical shock, always turn off the projector and dis- connect the power cord before changing the lamp. Turn off the projector. Disconnect the power cord from the outlet and the projector.
3 seconds to display the total used lamp time. • Press the MENU button on the projector during the lamp hour message. An adjustment message will appear. • Press press EXIT to leave. BenQ PB8220 User’s Guide FUNCTION to reset lamp hours or Maintenance...
Replace the batteries with new ones. Make sure there is no obstacle between the remote control and the projector. Stand within 6 meters (19.5 feet) of the projector. Make sure nothing is blocking the front and rear receivers. BenQ PB8220 User’s Guide Troubleshooting...
BenQ PB8220 User’s Guide Status Messages On-Screen Messages SEARCHING ACQUIRING SIGNAL OUT OF RANGE LAMP WARNING - CHANGE LAMP AND RESET LAMP TIMER! OUT OF LAMP USAGE TIME. YOU HAVE TO CHANGE THE LAMP! OUT OF LAMP USAGE TIME. CHANGE THE...
6.9 lbs (3.1 Kg) D-sub 15-pin (female) Mini DIN 4-pin port x1 RCA jack x1 RCA jack x3 Mini jack stero port RCA jack L, R x2 A/B series x1 2 watt x 1 9-pin x1 BenQ PB8220 User’s Guide Specifications...