Enhancing Gaming Experience; Setting To Start A Game Quickly; Setting Fps Crosshair - BenQ Gaming X300G User Manual

Enhancing gaming experience

Setting to start a game quickly

To enhance your gaming experience, you are provided with picture and
sound modes that are suitable for gaming.
1. The Auto Game Mode function helps to switch to a connected gaming
source (e.g., Nintendo Switch, PS5, Xbox Series S) and modes designed
for gaming automatically. Be sure Auto Game Mode is On under the
following.
• the Basic menu - Smart Auto Settings
• the Advanced menu - Game & Pic.
• the Advanced menu - Installation > Smart Auto Settings
2. If you prefer low latency, set 3D Keystone/Corner Fit at 0, Aspect Ratio
at Auto, Zoom Adjustment at 1.0x-1.2x.

Setting FPS Crosshair

If you need to display a crosshair on the screen for aiming at targets,
follow the instructions below.
1. Go to the Advanced menu - Game & Pic. > FPS Crosshair, and press
OK to display the FPS Crosshair page.
2. Press OK repeatedly to select a preferred crosshair type. Selecting
will not display a crosshair when you leave this page.
3. Press / / / to move the crosshair to a desired position.
4. To return to the default position, press BACK/
5. When all the adjustments are done, press BACK/
changes and the crosshair will be displayed on the screen.
When the crosshair is no longer needed:
1. Go back to the FPS Crosshair page.
2. Press OK repeatedly to select the crosshair type
BACK/ to save and leave the page.
44
for two seconds.
to save the
, and press