Table of Contents
Advertisement
aS
ey
Change parameter value.
Memory number disappears.
MEMORY
MODE
CH
DATA
New value is shown.
Selecting separate values for each channel
MONO
{oe |
CH SYNC
CH SYNC
Goes out
If the indicator of the CH SYNC
button is lit, press the button.
Indicator of CH SYNC button lit: Parameter values for
.
channels 1 and 2, and 3 and 4 are set together.
Indicator of CH SYNC button out: Parameter values for each
channel are set independently.
Note that pressing the CH SYNC button while the button is
out causes the value of the other channel to become the value
of the currently selected channel.
To compare effects to initial setting
Starts to flash
_
Prress EDIT button
ar
once
more.
e All parameters are reset to their initial values.
¢ in this condition, all controls except the EDIT button are
inactive. If the displayed parameter has a channel setting,
the CH EDIT button can be used to check the valuefor each
channel.
¢ Pressing the EDIT button once more returns the unit to the
changed parameters.
Note
if the memory number is changed with the MEMORY fun ction
during editing, the currently edited data are lost.
Advertisement
Table of Contents
