Ensure Chassis And Accessory Module Certifications; Prevent Power Supply Overload; Place Battery Marking; Use Only For Intended Applications - Intel A67054-002 Product Manual

Ensure Chassis and Accessory Module Certifications

Make sure that the chassis and possible subassemblies, such as a board or drive assembly, and
internal and external wiring and cables, are certified for the region(s) where the end product will be
used. Agent certification marks on the product are proof of certification. Typical certification
marks are as follows:
In Europe
The CE marking signifies compliance with all relevant European requirements. If the chassis does
not bear the CE marking, obtain a supplier's Declaration of Conformity to the appropriate
standards required by the European EMC Directive and Low Voltage Directive. Other directives,
such as the Radio and Telecommunications Terminal Equipment (R & TTE) directives may also
apply depending on product features.
In the United States
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL, CSA, or
ETL signifies compliance with safety requirements. External wiring and cables must also be UL
Listed and suitable for the intended use. The FCC logo (Class B for home or office use) signifies
compliance with electromagnetic interference (EMI) requirements.
In Canada
A nationally recognized certification mark such as CSA or cUL signifies compliance with safety
requirements.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits.

Place Battery Marking

There is insufficient space on this server board to provide instructions for replacing and disposing
of the battery. For system safety certification, the following statement or equivalent statement may
be required to be placed permanently and legibly on the chassis near the battery.
CAUTIONS
Risk of explosion if battery is incorrectly replaced.
Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer's instructions.

Use Only for Intended Applications

This server board was evaluated as Information Technology Equipment (I.T.E.) for use in
computers that will be installed in offices, homes, schools, computer rooms, and similar locations.
The suitability of this product for other applications or environments, (such as medical, industrial,
alarm systems, test equipment, etc.) may require further evaluation.
76 Intel Server Board S815EBM1 Product Guide