2-3. Selecting the Display Mode (CAL Switch Mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
1-DICOM
2-Custom
3-CAL
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
2-4. Adjusting Brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Adjustable range
0 to 100%
Procedure
1. Choose "Mode" from the Adjustment menu, and press
2. Choose "Brightness" from the "Mode" menu, and press
3. Use
or
for adjustment.
4. Press
to exit.
AvailabletodisplayinDICOMmode.
Availableforthesettingaccordingtoyourpreference.
Displaysthescreenadjustedbycalibrationsoftware.
Themodemenu
appears.
or
while the mode menu is displayed.
→1-DICOM←→2-Custom←→3-CAL←
Purpose
is pressed.
.
.
Chapter2AdjustingScreens
11