Chapter 1 Introduction; Features - Eizo RadiForce GX530-CL Instructions For Use Manual

Chapter 1 Introduction

Thank you very much for choosing an EIZO monochrome LCD monitor.

1-1. Features

• 21.3 inches
• Applicable to the resolution of 5M pixels (Portrait : 2048 × 2560 dots (H × V))
• Uses high-contrast panel (1200:1).
Enables the display of sharp images.
• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
• The RadiCS SelfQC function and the built-in Integrated Front Sensor allow the user to perform the
calibration and Grayscale Check for the monitor independently.
See "Chapter 4 Controlling Monitor Quality" (page
• The quality control software "RadiCS LE (for Windows) used to calibrate the monitor and to manage the
history is included.
See "1-2. EIZO LCD Utility Disk" (page
• The software "ScreenManager Pro for Medical" to adjust the screen using the mouse and keyboard is
included.
See "1-2. EIZO LCD Utility Disk" (page
• CAL Switch function for selecting an optimal calibration mode.
See "2-3. Selecting the Display Mode (CAL Switch Mode)" (page
• Selectable DICOM
• Frame Synchronous mode supported (24.5 to 25.5 Hz, 49 to 51 Hz)
• Power saving function
This product is equipped with power saving function.
- Power consumption when main power switch is Off: 0 W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
- Presence Sensor
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,
the function reduces the power consumption.
See "5-3. Setting the power saving mode when a person leaves the monitor" (page
• Built-in ambient light sensor
Built-in ambient light sensor measures the environmental illuminance in lux. Depending on the environment, the sensor
sometimes indicates different values from those measured by a stand-alone illuminance meter.
The usage of this sensor requires the quality control software "RadiCS/RadiCS LE" and the measurement is always
triggered by the user's operation in the corresponding menu.
For further details about the measured value and how to execute the measurement, refer to the RadiCS/RadiCS LE
User's Manual (on the CD-ROM).
• HDCP (High-bandwidth Digital Content Protection) (for DisplayPort only.)
Attention
• Storing or using the monitor at a temperature of under 30˚C and a humidity of under 70% is recommended, or it may
affect the measurement accuracy of the built-in sensor. Avoid storing or using the sensor where it may be exposed to
direct sunlight.
6
Chapter1Introduction
7).
7).
(page 33) Part 14 complied screen.
17).
11).
20).