Using Inter@Ct For The First Time - Hoover HF7 12 I Instructions For Use Manual

40000369.qxd 18/09/2003 11:42 Page 12

Using Inter@ct for the first time

This machine will operate prior to programming the Inter@ct set up. However, this
machine has Départ Différé and Programmation Fin De Cycle functions and for these
functions to work efficiently the Inter@ct set must be programmed. This is a simple
operation and special care has been taken during manufacture to ensure that the user
can operate this machine simply and effectively.
Programming the machine
Inter@ct needs to be programmed so that the correct clock setting, language and
personal requirements are set.
When the machine is turned on and the programme dial is moved away from the
"Arrêt" position to the programme selections a welcome message will appear.
HOOVER INTER@CT
WELCOME 11:06
This message is displayed for a short time while the machine recognises which
programme has been selected. When the machine is ready, the programme details will
appear on the display and from here you may now beging programming the machine.
Example
1 WHITE COTTON
90° HEAVY 1600 RPM
Enter the Menu
Prior to entering the Inter@ct menu please note you have 30 seconds per operation to
make your selection. Should you run out of time the display will return to the start
screen, and you simply have to re-enter the Inter@ct menu and continue with the
programming.
From this stage the menu can be programmed. Hold down the "Mini Charge" and the
"Prélavage" buttons together for 5 seconds or until the beep sounds.
The menu options can be changed by pressing the "Prélavage" button.
To confirm and enter an option press the "Mini Charge" button.
12