Hoover HF7 12 I Instructions For Use Manual page 18

40000369.qxd 18/09/2003 11:42 Page 18
Verrouillage Clavier button
This is a useful feature to prevent children playing with the option buttons and tampering
with the programme you have set.
After you have set the programme and option buttons you require, press the start button.
Press the programme lock button and this "locks" the control panel.
After you have set the programme and option buttons you require, press start and then the
programme lock button. This "locks" the control panel.
You may cancel this function by pressing the programme lock button briefly until you see the
light above the button flash. While this light is flashing, press the "Fast Iron" button – the display
will inform you that the options are no longer locked and further changes can now be made.
Programmation Fin De Cycle/Départ Différé buttons
The Programmation Fin De Cycle/Départ Différé options can be used if you want the
washing to be ready at a later time (but within 24 hours).
1. Départ Différé button
Press Départ Différé/Programmation Fin De Cycle button once and press the hours and
minutes buttons (to the left and right) until the required time is set. The display returns to
the programme option if the button is pressed within 5 seconds. Once you have set the
required start delay/end time, press the start button.
To cancel Départ Différé, hold down the button for 5 seconds.
2. Programmation Fin De Cycle button
Press Départ Différé/Programmation Fin De Cycle button twice and press the hours and
minutes buttons (to the left and right) until the required time is set. When entering the
option, the display will show the minimum time which you can set the programme to end by.
This time may only be extended as you require.
NOTE: When using the Départ Différé/Programmation Fin De Cycle functions, only use
detergents via the dispenser drawer. Adding detergents etc. to the drum and then leaving
them to stand for a long period of time may damage your laundry.
Variateur d'Essorage button
On selecting the wash programme the display will inform you of the maximum spin speed
permitted for that programme. By repeatedly pressing the select spin button the speed will
decrease by increments of 100 rpm. By continuously pressing the spin speed option the
spin may be cancelled if desired. On selecting the required spin speed the display will then
inform you of the chosen programme, its temperature and the newly selected spin speed.
18