Hoover HF7 12 I Instructions For Use Manual page 13

40000369.qxd 18/09/2003
Set New Time
This function needs to be set for two reasons – firstly to display the current time of
day on the screen and secondly for the Programmation Fin De Cycle/Départ
Différé settings to work correctly.
You will notice in the display window that the hours on the clock will be flashing.
Set the hours by continually pressing the "Prélavage" button and then press the
"Mini Charge" button to enter the hour. Next the minutes on the clock will begin to
flash, again press the "Prélavage" button until the required minutes are displayed
and press "Mini Charge" to input the selection.
When you have Set the New Time, the display will then ask if you wish to "Set the
Time Mode".
Setting the time mode
There are two ways to select the time mode.
The first is if you wish Programmation Fin De Cycle or Départ Différé to be
programmed by starting the actual time you want the programme to end or begin,
e.g., programme to end 08.00. This is called Absolute Time Mode. When utilising
the Programmation Fin De Cycle function (or Départ Différé), an example can be
seen below when the Absolute Time Mode has been selected in the menu set-up
stage.
Therefore, when setting the Programmation Fin De Cycle the programme (as
shown above) will end at 08.00.
The second is if you wish Programmation Fin De Cycle or Départ Différé to be
programmed by adding hours; e.g., programme to end in 1 1 /2 hours. This is called
Relative Time Mode. When utilising the Programmation Fin De Cycle function (or
Départ Différé) an example can be seen below when Relative Time Mode has
been selected is the menu set-up stage.
Therefore, when setting the Programmation Fin De Cycle the programme (as
shown above) will end at 15:30.
Both options are very useful, but we feel that the Absolute Time Mode will be
more beneficial and easier to use since there will be no need to calculate how
many hours you will need to leave before you want the machine to end or start.
11:42 Page 13
(default setting – ABSOLUTE)
PROGRAMME END
08.00
PROGRAMME END
BY 1H 30M
13
14:00
14:00