Table of Contents
Advertisement
6
7
8
6,5 (¼")
Wall
or
furniture
22 (�⁄ � ")
A Connecting element
B Alluminium frame
Once completed the previous steps, push the units in their final posi-
tion
.
6
If the units are to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is sufficient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its final position inside the
niche or structure.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Secure the appliance to the adjacent cabinets by fixing to these the
side profiles previously mounted on the appliance
To make this operation easier keep the door and the drawer open.
Mount the covering frames onto the profiles, first insert them laterally
and then push firmly until a "click" is heard
Side and central profiles mounting
6,5 (¼")
C
13 (½")
Appliance
A
D
E
B
44,4 (1 ¾")
6,5 (¼")
Appliance
A
D
B
D Connecting element
E Aluminium frame
Installation Guide
Series: Integrated
.
7
.
8
6,5 (¼")
Wall
or
furniture
22 (�⁄ � ")
21
Advertisement
Table of Contents
