Table of Contents
Advertisement
How to set the Fridge function
How to set the 0°C function
How to revert to the Freezer function
How to reset default settings
ATTENTION: If the default settings are restored, the
default mode of the Multizone compartment is fre-
ezer mode. If it was previously being used in refri-
gerator or 0°C mode be sure to set it back to your
desired setting.
How to activate the date
How to deactivate the date
After 6 months from the adjustment date / time will
appear on the display the message "Check Con-
denser", you will have to check and clean the con-
denser area (as described on p. 23). Press the Enter
button for 5 seconds to delete the message from the
display.
Select the Menu button
Multizone Options
The freezer compartment can, if required, be converted to the re-
frigeration o 0°C operating mode.
Settings
Fridge
Settings
Fresco
Settings
Freezer
Default Setting
This offers the possibility to reset default factory settings and can-
cels any previous changes.
Settings
Enter to confirm
Date
Set Date
The display will show the date in the format dd:mm:yy
(day:month:year), the day will blink. Use the Up/Down buttons
modify the setting, confirm with Enter
once the year is confirmed the date will be set.
Settings
How to set the date
Show Date
Using this function it is possible to deactivate/activate the date visuali-
zation on the display.
Settings
Settings
Time
Set Time
The display shows the hours and minutes in the format hh:mm and
with hh: blinking. Use the Up/Down buttons
and then confirm by pressing Enter
Once the minutes are confirmed, the time will be set.
Settings
How to set the time
Settings and Special Functions
Basic settings of the Menu
and used the Up/Down button
.
Multizone Options
Enter to confirm
Multizone Options
Enter to confirm
Multizone Options
Enter to confirm
Default Setting
Date
DATE: 01-01-2009
Date
DATE: 01-01-2009 On
Date
DATE: 01-01-2009 Off
Time
TIME: 01:01
to select
to go on to the next setting;
Set Date
Show Date
Show Date
to modify the setting
to go on to the next setting.
Set Time
5
5.3
to
15
Advertisement
Table of Contents
