Table of Contents
Advertisement
Getting started
10 | Sennheiser TV Clear Transmitter 2
2. Pairing the earbuds with the "TV Clear Trans-
mitter 2"
If you purchased the devices as a set, the earbuds and the transmit-
ter are factory paired with each other.
▷
If you purchased the devices separately, you have to manually
start the pairing process once. To do so, press the pairing button
of the transmitter and the pairing button of the earbuds for 2 sec-
onds (> 11).
After the first manual pairing, the earbuds automatically connect
to the transmitter when they are taken out of the charging case.
A current list of compatible products can be found at:
www.sennheiser-hearing.com/tvcleartransmitter2
Setting the earbuds to pairing mode
1. Make sure that both earbuds are properly inserted into the
charging case.
2. Press the pairing button for 2 seconds until the light indicator
starts flashing blue.
1
2
Hold 2s
3. Wait until all 3 light indicators flash blue (this can take up to
10 seconds). Pairing mode ends after 8 minutes or when pairing
was successful.
4. Leave the earbuds in the charging case and continue with "Set-
ting the transmitter to pairing mode" (> 10).
3 blue LEDs
Advertisement
Table of Contents
