Sennheiser TV Clear Set 2 Quick Manual page 26

Configuring the TV Clear
Earbuds 2
Switching the earbuds on and off
ON
The earbuds switch on automatically when they are taken out of the
charging case. They switch off when they are reinserted into the
charging case and are fully charged.
The light indicators light up:
Light indicator
green
orange
red
If an earbud has switched off, it can be switched on again by briefly
pressing the button.
Setting the earbuds to pairing mode
1. Make sure that both earbuds are properly inserted into the
charging case.
2. Press the pairing button for 2 seconds until the light indicator
starts flashing blue.
1
2
Hold 2s
Configuring the TV Clear Earbuds 2
Meaning
Battery charge status ok (> 50 %)
Battery charge status 20 – 50 %
Battery charge status < 20 %, charge the
rechargeable battery
short press
Sennheiser TV Clear Earbuds 2 | 13
3 blue LEDs