Table of Contents
Advertisement
Quick Links
TV Clear Transmitter 2
Transmitter
Model: TVC2-TX
Instruction manual
Use the search function, the navigation (left) or the following links:
Start
"The Sennheiser "TV Clear Transmitter 2""
"Product overview"
"Getting started"
"Daily use"
"FAQ/If a problem occurs ..."
"Specifications"
Sonova Consumer Hearing GmbH
Am Labor 1
30900 Wedemark
Germany
www.sennheiser-hearing.com
Version: 01/ 23
Advertisement
Table of Contents
Related Manuals for Sennheiser TV Clear Transmitter 2
Summary of Contents for Sennheiser TV Clear Transmitter 2
- Page 1 TV Clear Transmitter 2 Transmitter Model: TVC2-TX Instruction manual Use the search function, the navigation (left) or the following links: Start “The Sennheiser “TV Clear Transmitter 2”” “Product overview” “Getting started” “Daily use” “FAQ/If a problem occurs ...” “Specifications” Sonova Consumer Hearing GmbH...
-
Page 2: Important Safety Instructions
If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. 2 | Sennheiser TV Clear Transmitter 2... - Page 3 For safety reasons, only use certified and stabilized USB chargers with a rating of 5 V ⎓, 0.5 A. ▷ Protect your eyes of the optical light from the optical TOSLINK cable when plugged into a TV/device. Sennheiser TV Clear Transmitter 2 | 3...
- Page 4 Intended use/Liability The intended use of the “TV Clear Transmitter 2” is to establish a wireless connection between compatible earbuds (e.g. “TV Clear Earbuds 2”, “TVS 200 Earbuds”) and a TV (or any other audio source).
- Page 5 The Sennheiser “TV Clear Transmitter 2” General use The “TV Clear Transmitter 2” is a dedicated low-latency interface for wirelessly connecting compatible headphones to TVs, hi-fi systems, or other audio sources. The transmitter can be connected to an audio source via a digital optical connection or an analog audio output.
-
Page 6: Package Contents
TOSLINK connector and 3.5 mm mini plug Quick guide Safety guide Online you can find: • Frequently asked questions (FAQ): www.sennheiser-hearing.com/tvcleartransmitter2 • A list of accessories for the “TV Clear Transmitter 2”: www.sennheiser-hearing.com/tvcleartransmitter2 6 | Sennheiser TV Clear Transmitter 2... -
Page 7: Product Overview
... is switched on and does not transmit white sound (standby mode) flashes ... is in pairing mode blue flashes ... wrong audio input format (e.g. DTS) ... is switched off Sennheiser TV Clear Transmitter 2 | 7... -
Page 8: Getting Started
Getting started Getting started The following steps describe how to put the “TV Clear Transmitter 2” into operation for the first time in the best possible way. 1. Connecting the transmitter, e.g. to the TV Connect the USB power cable and the audio cable (digital or analog) to your TV or audio source (>... - Page 9 If your TV’s loudspeakers switch off when connected using the analog 3.5 mm audio cable, use the optical audio cable instead, or go to your TV’s menu to switch the loudspeakers on again. Sennheiser TV Clear Transmitter 2 | 9...
- Page 10 10 seconds). Pairing mode ends after 8 minutes or when pairing was successful. 4. Leave the earbuds in the charging case and continue with “Set- ting the transmitter to pairing mode” (> 10). 10 | Sennheiser TV Clear Transmitter 2...
- Page 11 The transmitter streams the audio signal to all paired devices simultaneously. • A device only needs to be paired with the transmitter once, unless the pairing is deleted on the side of the headphones. Sennheiser TV Clear Transmitter 2 | 11...
-
Page 12: Daily Use
During initial setup, you can use the volume controls on the transmit- ter to select a comfortable initial volume. To reduce the volume: ▷ Press the volume touch panel –. To increase the volume: ▷ Press the volume touch panel +. 12 | Sennheiser TV Clear Transmitter 2... - Page 13 (> 14). List of frequently asked questions (FAQ) Visit the list of frequently asked questions (FAQ) and suggested solu- tions including how-to videos for the "TV Clear Transmitter 2" at: www.sennheiser-hearing.com/tvcleartransmitter2 Sennheiser TV Clear Transmitter 2 | 13...
- Page 14 FAQ/If a problem occurs ... Instructions for troubleshooting for the “TV Clear Transmitter 2” Problem Cause Possible solution The audio source is Switch the audio source on. switched off. The cables are not properly connected to the “TV Clear Make sure that all cables are in the right Transmitter 2”...
- Page 15 Press the power touch panel to manually standby mode. into standby mode (The switch off the transmitter. SPDIF clock is not dis- abled/use of an active optical splitter). Sennheiser TV Clear Transmitter 2 | 15...
-
Page 16: Specifications
< 90 % non-condensing storage: < 90 % The “TV Clear Transmitter 2” uses a proprietary transmission tech- nology optimized for low latency and low current consumption. This is why the transmitter is not compatible with standard Bluetooth headphones. -
Page 17: Manufacturer Declarations
Handle lithium-containing batteries/ rechargeable batteries with special care, as they pose particular risks, such as the risk of fire and/or the risk of ingestion in the case of coin batteries. Sennheiser TV Clear Transmitter 2 | 17... - Page 18 Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laborato- ries Licensing Corporation. Other product and company names mentioned in this instruction manual may be trademarks of their respective holders. 18 | Sennheiser TV Clear Transmitter 2...