Sennheiser TV Clear Set 2 Quick Manual page 61

OPTICAL
Digital signal
fiber optic cable
Make sure that the selected audio cable is firmly connected to
both the transmitter and the audio source.
Connecting the transmitter using the optical cable
▷
Connect the narrow end (3.5mm TOSLINK mini plug) of the optical
cable to the transmitter and the wider end of the optical cable to
the OPTICAL DIGITAL AUDIO OUTPUT of your TV (or audio
source).
Connecting the transmitter using the analog cable
▷
Connect one end of the analog 3.5 mm audio cable to the trans-
mitter and the other end to the AUDIO OUT connection of your TV
(or audio source).
If your TV's loudspeakers switch off when connected using the
analog 3.5 mm audio cable, use the optical audio cable instead,
or go to your TV's menu to switch the loudspeakers on again.
Getting started
ANALOG
3.5 mm audio cable
Sennheiser TV Clear Transmitter 2 | 9