Table of Contents
Advertisement
Configuring the TV Clear Earbuds 2
14 | Sennheiser TV Clear Earbuds 2
3. Wait until all 3 light indicators flash blue (this can take up to
10 seconds). Pairing mode ends after 8 minutes or when pairing
was successful.
4. Leave the earbuds in the charging case and continue with "Con-
necting the earbuds to your smartphone (or tablet)" (> 14) or
"Connecting the earbuds to the TV transmitter" (> 15).
Connecting the earbuds to your smartphone (or tablet)
1
2
ON
4
When connecting the earbuds to the device for the first time, you
have to set them to pairing mode as described in chapter "Setting the
earbuds to pairing mode"(> 13). After pairing, the earbuds connect
automatically when you take them out of the charging case.
1. Open the Bluetooth settings and activate Bluetooth on your
smartphone.
2. Wait until you see the "Sennheiser TV Clear 2" in the list of avail-
able devices and select it.
Depending on your smartphone, you may have to allow access
to your phone contacts through the earbuds.
3. Your smartphone is now connected to the earbuds and the light
indicators on the charging case stop flashing.
4. Remove the left earbud from the charging case first.
5. Insert the earbuds into your ears. After insertion, you hear a con-
firmation. The sound from your smartphone will be played
through the earbuds when they are connected.
If the "Sennheiser TV Clear" app is installed and connected,
you may see "Sennheiser TV Clear 2 LE" in the list of paired
devices. Do not select this entry.
If you take both earbuds out of your ears, the sound is paused.
This behavior can be configured in the "Sennheiser TV Clear"
app.
3
other device
other device
Sennheiser
TV Clear 2
other device
Advertisement
Table of Contents
