Sennheiser SET 55 TV Quick Instructions

Quick instructions
²
´
¿
¸
Connecting the system components
Plug in one end of the connecting cable
If necessary, use one of the adapters ¹,
Plug in the other end of the connecting cable
Connect the mains unit
Place the receiver into the transmitter's charging compartment ².
Before you use the rechargeable battery
Adjust the volume of your sound source to a sufficient (medium) level.
Switching on and using the stethoset receiver
Turn the volume control
First adjust the volume to a low level. This protects your hearing from damage.
Then put the receiver on and adjust the volume to a comfortable level.
Use the balance control
If you cannot hear anything through the receiver, increase the volume of your sound source.
Switching off the stethoset receiver
To switch the receiver off, turn the volume control
Charging the stethoset reciever
Switch the receiver off. Place the receiver into the transmitter's charging compartment
exerting too much pressure. With a fully charged battery, the operating time is approx. 9 hours.
For details on the use of the Set 50 TV/Set 55 TV, please refer to the enclosed operating instructions.
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Set 55 TV
Set 50 TV
A
B
¹
C
¸
to the socket on your sound source (e.g. television).
to the transmitter
³
in the direction of "ON" until it clicks.
»
to adjust the volume between the left and right ear.
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
www.sennheiser.com
or (not included).
¸
to the blue socket
´
and to the mains.
for the first time, charge it for at least 14 hours.
³
in the direction of "OFF" until it clicks.
»
·
³
on the transmitter.
²
without
Printed in China
Publ. 10/06
517641 / A02