Disc Name Preset Play (Dnpp) - Kenwood KDC-6060R Instruction Manual

N OTE
• The number of discs w hose names can be stored w ill differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
Up to 10 CDs can be registered w ith this unit.
• Discs are identified by their total length and number of tracks. If
you play another CD that happens to have exactly the same
specifications as another CD w hose name is stored, the w rong
name w ill be displayed for it.
• If you w ant to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to enter the
changes.
• Pressing the reset button erases the disc nemes stored in this
unit, but does not erase the names stored in a disc changer.
Function of rem ote control w ith DNPP button
D isc N am e Preset Play (D N PP)
If you have preset the name of a disc that you w ant to listen
to in the disc changer, you can look for it by name and start
playing it.
1
Press the DNPP button on the remote control.
"DNP PLAY" w ill appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles
w hich you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected,
disc name preset w ill display "NO NAM E".
N OTE
• This function can only be used in disc changers that w ere
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
(See page 8)
of the disc in the disc changer to
discs that have not been
• Discs in the disc changer that have never been played before
w ill appear as "NO ACCES" w hen the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name.
Also note that "NO DISC" w ill be displayed w hen a disc has not
been loaded.
Rapid display (forw ard / reverse):
+
Press the DISC or DISC
+
Pressing the DISC
names/disc titles in order.
–
Pressing the DISC
names/disc titles in reverse order.
2
When the name appears for the disc you w ant to play
Press the OK button.
The disc w hose name is displayed w ill be recalled, and the disc
name preset play (DNPP) mode w ill end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode w ill be cancelled.
— 29 —
–
button.
button w ill rapidly display the preset
button w ill rapidly display the preset