Disc Name Preset Play (Dnpp) - Kenwood KRC-PS959R Instruction Manual

Disc control features
Function of Rem ote control w ith DNPP button (See page 8)
D isc N am e Preset Play (D N PP)
If you have preset the name of a disc that you w ant to listen
to in the disc changer, you can look for it by name and start
playing it.
1
Press the DNPP button on the remote control.
"DNP PLAY" w ill appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to
w hich you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset w ill display "NO NAM E".
N OTE
• This function can only be used in disc changers that w ere
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
w ill appear as "NO ACCESS" w hen the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it
using the disc scan or a similar function to display the disc
name. Also note that "NO DISC" w ill be displayed w hen a disc
has not been loaded.
Rapid display (forw ard / reverse):
Press the DISC
Pressing the DISC
names/disc titles in order.
Pressing the DISC
names/disc titles in reverse order.
2
When the name appears for the disc you w ant to play
Press the OK button.
The disc w hose name is displayed w ill be recalled, and the disc
name preset play (DNPP) mode w ill end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode w ill be cancelled.
Downloaded from: http://www.usersmanualguide.com/
(See page 7)
+ –
or DISC button.
+
button w ill rapidly display the preset
–
button w ill rapidly display the preset
— 28 —