Charging Times; Safety Instructions; Symbols And Icons - Parkside PPDSSA 12 A1 Original Instructions Manual

GB MT
Safety precautions aimed at protecting the
user should be based on estimated exposu-
re under actual usage conditions (all parts
of the operating cycle are to be considered,
including, for example, times during which
the power tool is turned off and times when
the tool is turned on but is running idle).

Charging times

The device is part of the X 12 V TEAM
series from Parkside and can be operated
using batteries of the X 12 V TEAM series
Charging time
(min.)
PLGK 12 A1
PLGK 12 A2
PLGK 12 A3
PLGK 12 B2
PDSLG 12 A1
PDSLG 12 A2
The charging time is influenced by factors such as the temperature of the
environment and the battery, as well as the mains voltage applied, and may
therefore deviate from the specified values.

Safety instructions

Ensure that the safety instructions are
observed when operating the appliance.

Symbols and icons

Symbols in the manual:
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with informa-
tion on the prevention of per-
sonal injury caused by electric
shock.
20
PAPK 12 A2
PAPK 12 A1 PAPK 12 A3
PAPK 12 A4
60
60
from Parkside. Batteries of the X 12 V
TEAM series from Parkside may only be
charged using chargers of the X 12 V
TEAM series from Parkside.
We recommend that you operate this ap-
pliance with the following batteries
only: PAPK 12 A3, PAPK 12 A4,
PAPK 12 B3, PAPK 12 B4, PAPK 12 D1
We recommend charging these
batteries with the following chargers:
PLGK 12 A2, PLGK 12 A3, PLGK 12 B2,
PDSLG 12 A2
PAPK 12 B2
PAPK 12 B3
PAPK 12 B4
60 120
45 60
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the appliance:
Carefully read these
Operating Instructions.
Caution! Hot surface.
Risk of burns.
Mode selection button
PAPK 12 D1
150
80