Translation Of The Original Ec Declaration Of Conformity - Parkside PPDSSA 12 A1 Original Instructions Manual

GB
MT
We hereby confirm that the
Cordless Impact Wrench
Design Series PPDSSA 12 A1
Serial Number 000001 - 035000
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU • 2011/65/EU* & (EU) 2015/863 • 2012/19/EU
In order to guarantee consistency, the following harmonised standards as well as
national standards and stipulations have been applied:
EN 62841-1:2015/A11:2022 • EN 62841-2-2:2014
EN 62471:2008 • IEC 62471:2006 (First Edition) • EN IEC 63000:2018
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
25.06.2023
* The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of
the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful subs-
tances in electrical and electronic appliances.
EC declaration of conformity
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
Translation of the original
Documentation Representative
Christian Frank
149