General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PPDSSA 12 A1 Original Instructions Manual

The device is part of the X 12 V TEAM
series from Parkside and can be operated
using batteries of the X 12 V TEAM series
from Parkside. The batteries may only be
charged using chargers of the X 12 V
TEAM series from Parkside.

General description

The illustrations are on the
front fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless Vehicle Impact Wrench
- 4 sockets
(17 mm, 19 mm, 21 mm, 23 mm)
- Storage case
- Instruction manual
Battery and charger are not
included.

Overview

1 Tool holder
2 Housing
3 Mode selection button
4 Vents
5 Battery charge level indicator
6 Handle
7 On/off switch
8 Rotational direction switch
9 LED work light
10 Socket, 17 mm
11 Socket, 19 mm
12 Socket, 21 mm
13 Socket, 23 mm
14 Storage case
15 Charger
16 Rechargeable battery
17 Release button

Functional description

The wireless impact wrench has clockwise/
counter-clockwise rotation and a 1/2 "
square drive. The rotary impact function of
the device converts the force of the motor
into uniform rotary impacts. The striking
mechanism switches on when tightening
and loosening materials.

Technical data

Cordless Impact Wrench ...... PPDSSA 12 A1
Rated input voltage U .................. 12 V
Idling speed n
.............. 1200-2700 min
0
Tool holder ..................................... 1/2"
Weight (without accessories) approx. 0.9 kg
Protection category ......................... IPX0
Sound power level
) ........................ 77.9 dB, K
(L
pA
Sound power level (L
measured ................. 85.9 dB; K
) .3.280 m/s²; K = 1,5 m/s²
Vibration (a
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Rechargeable battery ...................... Li-Ion
The total vibration value(s) and the noise
emission value(s) stated have been measu-
red according to a standardised test pro-
cedure and can be used to compare one
power tool with another.
The total vibration value(s) and the specified
noise emission value(s) stated can also be
used for a provisional assessment of the load.
Warning: The vibration and noise
emissions may deviate from the
specified values during actual use of the
power tool, depending on how the power
tool is being used and, in particular, what
kind of material is being worked on.
GB MT
= 3 dB
pA
)
WA
= 3 dB
WA
19
-1