Grandstream Networks HT812 Series Administration Manual page 38

Added feature "Validate Server Certificates". [Validate Server Certificates]
Added support for [DDNS]
Added feature Blacklist for Incoming Calls. [Blacklist for Incoming Calls]
Added support for [Telnet]
Added feature [Play busy/reorder tone before Loop Current Disconnect]
Firmware Version 1.0.5.11
Changed default "Upgrade Via" from HTTP to HTTPS. [Upgrade via] [Upgrade Protocol] [UPGRADE PROTOCOL]
[UPGRADING AND PROVISIONING]
Added the ability to schedule [Automatic Reboot]
Added support for [SNMPv3]
Added support for 3 level access through RADIUS authorization (Admin, User and [viewer])
Added option to customize number of failed [Web Access Attempt Limit] to access web GUI
Added option to customize idle time to logout the web access with [Web Session Timeout]
Added option to disable WAN side ports [Black List for WAN Side Port]
Added feature "Caller ID Fetch Order" option under FXS port settings. [Caller ID Fetch Order]
Added feature "Enable High Ring Power" option under FXS port settings. [Enable High Ring Power]
Added feature "Internet Protocol" to choose from "IPv4 Only", "IPv6 Only", "Both, prefer IPv4", "Both, prefer IPv6".
[Internet Protocol]
Added feature "IPv6 Address" to configure IPv6 Address. [IPv6 Address]
Firmware Version 1.0.3.7
Added option "Use Actual Ephemeral Port in Contact with TCP/TLS" to force device to use actual ephemeral port. [Use
Actual Ephemeral Port in Contact with TCP/TLS]
Added option "SIP URI Scheme When Using TLS" to choose between 'SIP' and 'SIPS'. [SIP URI Scheme When Using TLS]
Added Option "Backup Outbound Proxy" to use backup Outbound Proxy if Outbound Proxy registration expires. [Backup
Outbound Proxy]
Added option "Prefer Primary Outbound Proxy" to enable registration through primary outbound proxy if registration
expires. [Prefer Primary Outbound Proxy]
Added option "Enable RTCP" to enable RTCP function through Web UI. [Enable RTCP]
Added option "Hold Target Before Refer" to enable device to hold before being referred. [Hold Target Before Refer]
Added Option "Enable Session Timer" to disable session timer. [Enable Session Timer]
Added feature "Conference URI" to support Conference URI. [Conference URI]
Added feature "White List for WAN Side" for remote management. [White List for WAN Side]
Added feature "Black List for WAN Side" for remote management. [Black List for WAN Side]
Added option "Web Access Mode" to choose between "HTTPS" and "HTTP" to access device Web UI. [Web Access Mode]
Added feature "HTTPS Web Port" to set HTTPS web port instead of using default HTTPS port. [HTTPS Web Port]
Added feature "SSH Port" to self-configure SSH port. [SSH Port]
Added SNMP related features.
Firmware Version 1.0.3.2
Added option "DNS SRV use Registered IP" to force DNS SRV to use registered IP instead of use first SRV. [DNS SRV use
Registered IP]
Changed default NTP server from us.pool.ntp to pool.ntp.org.
Firmware Version 1.0.2.7
No major changes
Firmware Version 1.0.2.5
Changed OPUS Payload Type default value to 123 to match other GS products. [OPUS Payload Type]
Firmware Version 1.0.2.3
Added network check mechanism to enable or disable WAN port web access.
Added a re-enter box to confirm change user and admin password on web GUI to avoid typo or mistakes. [Confirm End
User Password] [Confirm Admin Password]
Firmware Version 1.0.2.1
This is the initial version for HT812/HT814.
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT