Grandstream Networks HT812 Series Administration Manual page 14

HTTP/HTTPS FTP/FTPS Password Enters password to authenticate with HTTP/HTTPS FTP/FTPS server.
Checks if firmware file is with matching prefix before downloading it. This field enables user to
Firmware File Prefix
store different versions of firmware files in one directory on the firmware server.
Checks if firmware file is with matching postfix before downloading it.
Firmware File Postfix This field enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if configuration files are with matching prefix before downloading them. This field
Config File Prefix
enables user to store different configuration files in one directory on the provisioning server.
Checks if configuration files are with matching postfix before downloading them. This field
Config File Postfix
enables user to store different configuration files in one directory on the provisioning server.
Allows users to configure variables on the configuration server path to differentiate the directories
Enable using tags in URL
on the server.
Always send HTTP Basic Default is No. If set to Yes, The device will send configured user name and password within
Authentication Information HTTP request before server sends authentication challenge.
Obtains configuration and upgrade server's information using options 66 from DHCP server.
Note: If DHCP Option 66 is enabled, the HT8xx will attempt downloading the firmware file from
Allow DHCP Option 66 or 160 to
the server URL provided by DHCP, even though Config Server Path is left blank.
Override Server
The server URL provided by DHCP can include authentication credentials using following
format: "username:password@Provisioning_Server_IP".
Allows users to enable the Additional Override DHCP Option in Option 150. The default value is
Additional Override DHCP Option
"None".
Sends multicast "SUBSCRIBE" message for provisioning at booting stage, used for PnP (Plug-
3CX Auto Provision
and-Play) configuration. Default is Yes.
Specifies when the firmware upgrade process will be initiated; there are 4 options:
No: The HT8xx will only do an upgrade once at boot up.
Check every X minutes: User needs to specify a period in minutes.
Automatic Upgrade
Check every day: User needs to specify the start hour and the end hour of the day (0-23).
Check every week: User needs to specify "Day of the week (0-6)". (Day of week is starting from
Sunday).
Default is No.
Randomized Automatic Upgrade within the range of hours of the day or postpone the upgrade
Randomized Automatic Upgrade
every X minute(s) by random 1 to X minute(s).
Configures the HT8xx to always search for the new firmware at boot up. During the boot stage,
Always Check for New Firmware at
the HT8xx will contact the firmware upgrade server to search for a new firmware, when available
Boot up
it will start the upgrade process, otherwise it will boot normally.
Configure the HT8xx to search for the new firmware when the firmware prefix / suffix changes.
Check New Firmware only when
When this option is selected, the HT8xx will check for updates only when the pre/suffix has been
F/W pre/suffix changes
changed.
Configures the HT8xxto skip the firmware check, when this option is selected the HT8xx will
Always Skip the Firmware Check
always skip searching for a new firmware.
Configuration File Types Allowed Allows users to configure provision configuration file type in xml file only or all file types.
This feature allows users to download and process all available config files. By default, the device
will provision the first available config in the order of cfgMAC > cfgMAC.xml >
cfgMODEL.xml > and cfg.xml (corresponding to device-specific, model-specific, and global
Download and Process All Available configs).
Config Files If this option is enabled, the device will inverse the downloading process to cfg.xml >
cfgMODEL.xml > cfgMAC.bin > cfgMAC.xml and add cfgMAC_override.xml. The following
files will override the files that have already been loaded and processed.
The default value is "No"
Disables the SIP NOTIFY Authentication on the phone adapter. If set to "Yes", the phone adapter
Disable SIP NOTIFY
will not challenge NOTIFY with 401.
Authentication
The default setting is "No"
Authenticates configuration before being accepted. This protects the configuration from
Authenticate Conf File
unauthorized modifications. Default is No.
This feature allows users to validate server certificates with our trusted list of TLS connections.
Validate Server Certificates The device needs to reboot after changing the setting.
Default is enabled.
Uses the certificate for Authentication if "Check Domain Certificates" is set to "Yes" under
Trusted CA certificates A
"Account"–> "SIP Settings".
Uses the certificate for Authentication if "Check Domain Certificates" is set to "Yes" under
Trusted CA certificates B
"Account"–> "SIP Settings".
Load CA Certificates This feature allows user to specify which certificate to trust when performing server
authentication.
Build-in trusted : (Default) Build-in trusted certificates
Custom trusted certificate: Uploaded Certificates