Grandstream Networks HT812 Series Administration Manual page 15

All trusted Certificates: Both built-in and uploaded Certificates
Configures the Root CA version. can be set to either Current root or new root.
Root CA Version
Default Value is New Root.
Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT8xx has built-in
private key and SSL certificate.
SIP TLS Certificate
Maximum supported length is 4069.
Specifies TLS private key used for SIP over TLS is in X.509 format.
SIP TLS Private Key
Maximum supported length is 4069.
SIP TLS Private Key Password Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Custom Certificate
Allows users to update to the device their own certificate signed by a custom CA certificate to
(Private Key + Certificate) manage client authentication.
Configures the Gen-2 Elliptic Curve Private Key. based on RFC 5915.
Gen-2 EC private key The Max value length is 8192 characters.
Sets the phone adapter system to enable the "CPE WAN Management Protocol" (TR-069).
Default setting is Yes.
Enable TR-069
Note: New Parameters were added to the TR069 Data model starting from Firmware version
1.0.47.4
TR-069 firewall rules Configures the TR-069 firewall rules , Value port range is 1-65535
Specifies URL of TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com), or IP
ACS URL address.
Default setting is: "https://acs.gdms.cloud"
ACS Username Enters username to authenticate to ACS.
ACS Password Enters password to authenticate to ACS.
Periodic Inform Enable Sends periodic inform packets to ACS. Default is Yes.
Sets frequency that the inform packets will be sent out to ACS.
Periodic Inform Interval
Default is 86400 seconds.
Connection Request Username Enters username for ACS to connect to the HT8xx.
Connection Request Password Enters password for ACS to connect to the HT8xx.
Connection Request Port Configures the TR-069 connection request port. The value range is 0 to 65535.Default is 7547
CPE SSL Certificate Configures the Cert File for the phone adapter to connect to the ACS via SSL.
CPE SSL Private Key Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Enable SNMP Default is No.
SNMP Version Choose between (Version 1, Version 2c, or Version 3).
SNMP Port Listening Port of SNMP daemon (Default 161).
IP address of trap destination. Up to 3 trap destinations are supported. Users should enter the IP
SNMP Trap IP Address
addresses separated with comma (,).
SNMP Trap port Port of Trap destination (Default 162)
SNMP Trap Version Choose between (Version 1, Version 2c, or Version 3).
SNMP Trap Interval Time interval between traps (Default is 5).
SNMPv1/v2c Community Name of SNMPv1/v2c community.
SNMPv1/v2c Trap Community Name of SNMPv1/v2c trap community.
SNMPv3 Username Username for SNMPv3.
noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.
SNMPv3 Security Level authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
SNMPv3 Authentication Protocol Select the Authentication Protocol: "None" or "MD5" or "SHA."
SNMPv3 Privacy Protocol Select the Privacy Protocol: "None" or "AES/AES128" or "DES".
SNMPv3 Authentication Key Enter the Authentication Key.
SNMPv3 Privacy Key Enter the Privacy Key.