Grandstream Networks HT812 Series Administration Manual page 16

SNMPv3 Trap Username Username for SNMPv3 Trap.
noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.
SNMPv3 Trap Security Level authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
SNMPv3 Trap Authentication
Select the Authentication Protocol: "None" or "MD5" or "SHA".
Protocol
SNMPv3 Trap Privacy Protocol Select the Privacy Protocol: "None" or "AES/AES128" or "DES".
SNMPv3 Trap Authentication Key Enter the Trap Authentication Key.
SNMPv3 Trap Privacy Key Enter the Trap Privacy Key.
Enable RADIUS Web Access
Default is No.
Control
Action upon RADIUS Auth Server Choose action upon RADIUS server error. Default is Authenticate Locally (Default Authenticate
Error Locally)
RADIUS Auth Server Address Address of RADIUS Auth server.
RADIUS Auth Server Port Port of RADIUS Auth server.
RADIUS Shared Secret Set RADIUS shared secret.
Configure RADIUS VSA Vendor ID to match RADIUS server's configuration. Default is 42397
RADIUS VSA Vendor ID
for Grandstream Networks Inc.
RADIUS VSA Access Level Configure RADIUS VSA Access Level Attribute to match RADIUS server's configuration.
Attribute Incorrect setting would cause Radius authenticate fail.
Enable DDNS Allow users to use DDNS.
Selects DDNS Server: dyndns, freedns.afraid.org, zoneedit.com, no-ip.com, oray.net.
DDNS Server
Default is dyndns.
DDNS Username 64 characters as Max String Length.
DDNS Password 64 characters as Max String Length.
DDNS Hostname 64 characters as Max String Length.
DDNS Hash 64 characters as Max String Length.
Enable OpenVPN® Allow user to enable OpenVPN®. Default is No.
OpenVPN® Server Address Specify the IP address or FQDN for the OpenVPN® Server.
OpenVPN® Port Specify the listening port of the OpenVPN® server. Default is 1194
OpenVPN® Interface type Specify the Interface type of OpenVPN® whether TAP or TUN. Default is TUN.
OpenVPN® Transport Specify the Transport Type of OpenVPN® whether UDP or TCP. The default is UDP.
Enable OpenVPN® LZO
Enable OpenVPN® LZO Compression. Default is Yes.
Compression
OpenVPN® Encryption Select the OpenVPN® Encryption. Default is BF-CBC 128 bit (default key).
OpenVPN® Digest Select the OpenVPN® Digest. Default is SHA1.
OpenVPN® CA Specifies the OpenVPN® CA. Maximum Character Number is 8192.
OpenVPN® Certificate Specifies the OpenVPN® Certificate. Maximum Character Number is 8192.
OpenVPN® Client Key Specifies the Client Key. Maximum Character Number is 8192.
OpenVPN® Client Key Password Configures the OpenVPN® Client Key Password. Maximum Length is 64.
OpenVPN® username Configure the OpenVPN® username.
OpenVPN® password Configure the OpenVPN® password
Configuration option is set ring cadence on FXS port for all incoming calls.
System Ring Cadence Syntax: c=on1/off1-on2/off2-on3/off3; (3 cadences maximum)
Default is set to c=2000/4000; (US standards)
Call Progress Tones: Using these settings, users can configure tone frequencies and cadence according to their
preference. By default, they are set to North American frequencies.
Dial Tone
Configure these settings with known values to avoid uncomfortable high pitch sounds. ON is the
Ringback Tone
period of ringing ("On time" in 'ms') while OFF is the period of silence. In order to set a
Busy Tone