Additional
information
[]Noto
• If the unit does not operate normally due to external effects such as static electricity discon_
nect the power pFugfrom the outlet and insert again to return to normal operating condi-
tions.
Resetting the main unit
Use this procedure
to _eset all the receiver's settings to the facto_
default. Use the front panel
centrals
to do this.
1
Switch the receiver on.
2
While holding down
the TONE button,
press and hold the _ STANDBY/ON
button
for about three seconds.
3
When you see RESET? appear in the display, press the TONE button.
OK? shows in the display,
4
Press TONE once more to confirm.
OK appears
in the display to ind care that the receiver has been reset to the factol_/default
settings,
ER