Pioneer VSX-D712 Operating Instructions Manual page 46

D _ Setting up the receiver
One of the following configurat ons should
match your setup:
F FS-CS-SS
FL-C_-S_ FS-CS-S_
I
FL-C_-SS FS-C_-SS
I
FL-C_-SL FS-C_-S_
I
FL-CS-S_ FL-CL-SL
I
FL-CS-SS FL-CL-SS
I
FL-CS-SL FL-CL-S_
I I
Surround back
speaker setting
• Default sett ng: S (VSX_D812), _ (VSX-
D712)
You must let the rece vet know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
flom the receiver to the speakers. If you have
connected a surround back subwoefer (VSX_
D812), you should select the surround back
subweofer sett ng (SB SW) from the options.
Choose _ (asterisk) if no speaker s
connected.
• Use 1} or _ to select SBS, SB _, SB SW
or SB L
* VSX-D8_2 only
• To select SB L you must have SL selected
in the Speakersett/ng.
Subwoofer setting
You can choose whether the subwoofer is
used or not, Use the plus (PLUS) sett ng for
extra bass.
• Use 1} or _ to select subwoofer YES,
PLUSor NO.
r_Note
• If you chose the small front speaker
setting, SW YES is automatically set and
locked.
• When you select the PLUSsetting, you
wll get the bass sounds from the
subwoofer even if the front speakers are
set to L
Crossover frequency setting
• Default sett ng: 100 Hz
Crossover frequency is the point where the
_eceiverdivides the hgh and low sounds (the
frequencies) between the speakers. Since
most smaller speakers can't handle deep
bass tones, you can send these sounds to the
subweofer (or if you don't have a subwoefer,
the large (L) speakers in your system) instead
of the speakers set to small (S) in youl setup.
Choose the point at which you want the
frequency routed to the subwoefer (or L
speakers)
D