Printer Problems - Gateway E-3600 System Manual

Printer problems

The printer will not turn on.
Probable cause
The printer is not plugged in
The printer is not turned on
The printer is defective
The printer is turned on but will not print.
Probable cause
The printer is not connected
to the computer
The printer is not designated
as the default printer
The printer has not been
added to the computer.
The printer is not on-line
(ready)
The printer prints garbled text.
Probable cause
The wrong driver is being
used for the selected printer
Solution
Make sure the power cable is plugged into a
working power source.
Make sure the printer's power switch is
pressed or set to the On position. If the printer
is turned on, the green power LED should be
illuminated.
Try another printer, if one is available.
Solution
Make sure the data cable is properly
connected between the printer and the
computer. Check the connector and cable for
bent or broken pins.
If the printer that you are trying to print to is
not the default printer, make sure you have
selected it through the program's printer setup
function.
In the Printers window, double-click Add
Printer. Follow the on-screen instructions for
adding the new printer.
Make sure the on-line or ready light is on, or
the display indicates "Ready."
Solution
In the Printers window, click to select the
printer, click File, then select Properties.
Make sure the printer is using the correct
printer driver. If not, install the correct one.
Printer problems
117