Gateway E-3600 System Manual page 17

Component
Power connector
Voltage switch
Mouse port
Keyboard port
Network jack
USB ports
Serial port
Parallel port
USB ports
Microphone jack
Line out jack
Line in jack
Icon Description
Plug the power cable into this connector.
Before turning on the computer, make sure that the switch
is in the proper position for the correct power available.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply is always
set to this when the computer is operating in the United
States. In other areas of the world, such as Europe, the
utility power is supplied at 230 volts at 50 Hz. If the
computer is operating in an environment such as this, the
voltage switch needs to be moved to 230.
Plug a Personal System/2
Plug a PS/2 keyboard into this port.
Plug an Ethernet 10/100 network cable into this jack.
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Plug a serial device (such as a digital camera) into this
port.
Plug a parallel device (such as a printer) into this port.
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Plug a microphone into this jack. This jack is color-coded
red.
Speakers. Plug powered speakers, an external amplifier,
or headphones into this jack. This jack is color-coded
green.
Plug an external audio input source (such as a stereo) into
this jack so that you can record sound on your computer.
This jack is color-coded blue.
®
(PS/2) mouse into this port.
Gateway Mid-Tower back
9