Gateway E-3600 System Manual page 70

5
While holding the expansion card retention cover open, remove the
expansion card.
You can slightly seesaw the card end-to-end to loosen the card, but do
not bend the card sideways.
Caution
6
While holding the retention cover open, install the new card into the
expansion slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
62
Working with the Gateway Mid-Tower case
Do not touch the contacts on the bottom part of the
expansion card. Touching the contacts can cause
electrostatic damage to the card.