Memory And Processor Problems - Gateway E-3600 System Manual

Memory and processor problems

The computer detected memory errors during start up.
Probable cause
Memory was added or
removed, and the new
configuration was not saved
in BIOS Setup utility
The memory was installed
incorrectly
A memory chip is faulty
The computer does not recognize a new processor.
Probable cause
The processor was not
seated properly in the socket
114
Troubleshooting
Solution
Open the BIOS Setup utility and save the new
memory configuration.
Make sure the memory is seated and oriented
correctly.
Replace the card with the faulty chip.
Third-party diagnostic programs can help
determine which chip or memory segment is
failing.
Solution
Check the installation. Make sure the
processor is fully seated in its socket. The
processor should be recognized automatically
if it was installed correctly.