Replacing The Feed Module - Kodak i4 50 Series User Manual

Replacing the feed module

A-61837 September 2016
9. Replace each core assembly in the lower feed module housing and align
the tabs on the upper housing with the slots on the lower housing.
10. Press the upper and lower housings together until they snap into place.
11. Insert the pin on the left side of the feed module with the rod (1); align the
upper tab with the slot (2); align the pin on the right side of the feed module
with the rod (3) and turn the green feed module release knob (4) to re-
engage the feed module. Verify that the feed module is securely in place
and moves freely after you install it.
12. If you released the feed module using Method 2, close the scanner cover
and the printer access cover.
13. Reinstall the output tray.
63