Siemens FLENDER H SH Series Assembly And Operating Instructions Manual page 95

12.2 Declaration of conformity
within the meaning of EC Directive 94/9/EC of 23.03.1994 and the legal requirements laid down for its
implementation
The manufacturer, Siemens AG, 46395 Bocholt, declares that the equipment described in these assembly
and operating instructions:
is in conformity with Article 1 and Article 8, Paragraph 1 b) ii) or 1 c) of Directive 94/9/EC and complies with the
requirements of Directive 94/9/EC and the following standards:
DIN EN 1127‐1 :10‐2011
DIN EN 13463‐1 :07‐2009
DIN EN 13463‐5 :10‐2011
DIN EN 13463‐6 :07‐2005
DIN EN 13463‐8 :01‐2004
DIN EN 60079-0 :03‐2010
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, D ­ 44727 Bochum, code number: 0158.
Penig, 2013‐02‐07
Penig, 2013‐02‐07
Declaration of conformity
Gear unit
H.SH, H.VH, H.HH, H.DH, H.KH, H.FH,
H.HM, H.DM, H.KM, H.FM, H.PH
B.SH, B.VH, B.HH, B.DH, B.KH, B.FH,
B.HM, B.DM, B.KM, B.FM
Sizes 1 to 22
Friedheim Schreier (Director SGU Engineering)
Michael Kupke (Director Business Subsegment SGU)
BA 5030 en 02/2013
95 / 96