Omron 3G3JV-A2015 User Manual page 158

List of Parameters
Pa- Name
rame-
ter
No.
n78 Error log
n79 Software number
Note 1. Values will be set in 0.1-Hz increments if the frequency is less than 100 Hz and 1-Hz incre-
ments if the frequency is 100 Hz or over.
Note 2. With 460-V Inverters, the values for the upper limit of setting ranges and the default settings
will be twice those given in the above table.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Used to display the latest error recorded.
Display
Note "– – –" will be displayed if no error has
been recorded.
Note This parameter is monitored only.
Used to display the software number of the
Inverter for OMRON's control reference
use.
Note This parameter is monitored only.
Set- Unit Default Changes
setting
ting of set-
range ting
--- --- --- ---
--- --- --- ---
Chapter 9
Refer-
during ence
opera- page
tion
6-21
---
9-13