Omron 3G3JV-A2015 User Manual page 153

List of Parameters
Pa- Name
ram-
eter
No.
n39 Multi-func-
12
tion input 4
(Input termi-
nal S5) )
13
14
15
16
17
19
20
21
22
34
9-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
External ON: Output shut off (while
base block motor coasting to a stop
command and "bb" flashing)
(NO)
External OFF: Output shut off (with
base block motor free running and "bb"
command flashing)
(NC)
Search com- ON: Speed search
mand (Searching starts from n09)
(Searching
starts from
maximum
frequency)
Search com- ON: Speed search
mand
(Searching
starts from
preset fre-
quency)
Acceleration/ ON: Acceleration/Decelera-
Decelera- tion is on hold (running at
tion-prohibit parameter frequency)
command
Local or re- ON: Local mode (operated
mote selec- with the Digital Operator)
tion
The Inverter stops accord-
Emergency
ing to the setting in n04 for
stop fault
(NO) interruption mode selection
with the emergency stop in-
put turned ON. t t d ON
Emergency
stop alarm NO: Emergency stop with
(NO) the contact closed.
NC: Emergency stop with g
th the contact opened. t t
Emergency
stop fault Fault: Fault output is ON
(NC) and reset with RESET
input. Alarm output is ON
(no reset required). ( t
Emergency
stop alarm "STP" is displayed (lit with
(NC) fault input ON and flashes
with alarm input ON)
Up or down Up or down command (set
command in n39 only)
By setting n39 to 34, the
set value in n38 is ignored
and the following setting
are forcibly made.
S4: Up command
S5: Down command
Set- Unit
ting of set-
range ting
2 to 8, 1
10 to
22, 34
g y
y
d
i d)
Chapter 9
Default Changes Ref-
setting
during er-
opera- ence
tion page
6 No 5-18