Table of Contents
Advertisement
Operating Instructions (continued)
Secure the ECLIPSE and the DC Power Supply in your vehicle and
WARNING
make sure the air inlet and exhaust airflow are not blocked. This may
impact performance.
WARNING
DO NOT
vehicle without the engine running or attempt to start the vehicle
while the DC Power Supply is connected to the vehicle. This may
drain the vehicle's battery.
A buzzer in the DC Power Supply is intended to warn user when low vehicle power is
present. Immediately disconnect the DC Power Supply from the vehicle for low voltage
alarm conditions.
If the vehicle power source (vehicle accessory connector) drops below
WARNING
11.5 Volts (brownout) the ECLIPSE will revert to Power Cartridge
operation (if present). The External Power Present Indicator may remain on.
TYPICAL FLOW RATES AVAILABLE AT EACH FUSE SETTING
Setting
Continuous
0.5
Yes
1.0
Yes
1.5
Yes
2.0
Yes
2.5
NO
3.0
NO
3.5
–
4.0
–
4.5
–
5.0
–
5.5
–
6.0
–
Actual performance may vary dependent upon usage conditions and vehicle.
20 | ECLIPSE
TM
Model 1000
User Manual
leave the ECLIPSE or DC Power Supply plugged into the
10 AMP
Pulse
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
15 AMP
Continuous
Pulse
Yes
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
Yes
–
Yes
–
Yes
–
Yes
–
Yes
–
Yes
Advertisement
Table of Contents
