Eclipse 1000 User Manual page 21

Hide thumbs Also See for 1000:
Table of Contents

Advertisement

DO NOT use any cord if damaged. Improper use of the Power Cord
WARNING
may result in a fire or electrical shock hazard.
DO NOT touch the Power Cartridge cavity connectors with the Power
WARNING
Cartridge removed while the unit is connected to an external power
source. This may result in electrical shock.
(1) AC POWER SUPPLY:
for use at home or where standard AC power is available. To plug into AC, make
sure the AC Power Supply cord is securely inserted in the power receptacle on the
side of the unit, and plug the AC Power Supply into an AC outlet. When the unit is
plugged in properly, a green indicator on the AC Power Supply will light and the
External Power Present Indicator
The AC Power Cord used with the ECLIPSE Oxygen System must
CAUTION
meet the requirements of the country where the product is used.
Use with grounded, 3-pin receptacle. DO NOT remove ground pin from
CAUTION
cord. Use only with SeQual supplied cords.
DO NOT connect the ECLIPSE to an extension cord or electrical
CAUTION
outlet controlled by a switch.
(2) DC POWER SUPPLY:
DC accessory outlets, such as those found in motor vehicles.
determine the Fuse rating in your motor vehicle, either 15 AMP or 20 AMP.
Consult your vehicle's Operator's Manual or look at your fuse box in the vehicle.
Set the switch on the DC Power Supply to the appropriate one. Use the 10 AMP
position on the DC Power Supply for a 15 AMP vehicle fuse and use the 15 AMP
position for a 20 AMP or greater vehicle fuse.
cord in the proper receptacle on the side of the ECLIPSE. Next, insert the DC
Power Supply plug into the DC accessory outlet in your vehicle. When the system
is properly plugged in and receiving power from the DC source, a green indicator
light on the Power Supply, and the
on the control panel will appear.
The ECLIPSE System includes a universal AC Power Supply
,
A DC Power Supply allows the system to operate from
External Power Present indicator,
Model 1000 User Manual
will appear on the control panel.
You need to
Insert the DC
Start your vehicle.
ECLIPSE
TM
Model 1000
| 19
User Manual

Advertisement

Table of Contents
loading

Table of Contents